PDF Free Download | Light Metals 2022 Conference proceedings by Dmitry Eskin
Contents of Light Metals 2022 eBook
- Part I Alumina and Bauxite
- Green Alumina: A Technological Roadmap
- Fast Solution of Shrinking Core Model for Calcination Applications
- Results of Metso Outotec Calciner Optimizer Operation at CBA Alumina Calcination Plants
- Potential of Alumochloride Technology for Production of Competitive Products
- Study the Effects of Process Condition on the Electric Conductivity of Sodium Aluminate Solution
- Production of Pig Iron from High-Iron Red Mud by Smelting Reduction
- Removal of Fluorine, Chlorine, and Nitrogen from Aluminum Dross by Wet Process
- Recovery of Iron from High-Iron Bayer Red Mud by Melting Reduction with Spent Cathode Carbon Block
- Effect of Thermal Activation on Phase Transformation and Pre-desiliconization of Low-Grade Bauxite
- Part II Aluminum Alloys, Processing and Characterization
- Development of Advanced Aluminum Alloy for Structural Castings
- Interplay Between Cooling Rate, Microstructure, and Mechanical Properties of an Al–Ce–Ni–Mn Alloy
- Microstructural Evolution of High Zn -Series Aluminum Alloy with Addition of Titanium
- Influence of Tungsten Nanoparticles on the Structure and Mechanical Behavior of AA Under Quasi-static Loading
- On the Influence of Alloy Composition and Sn Micro-Alloying on Mechanical Properties and Corrosion Resistance
- Effect of Alloying Elements on Strength Properties and Casting Properties of Corrosion Resistant Quench-Free Al–Ca Alloys
- Effect of Bi Alloying Element Addition on Microstructural Change in Al–Mg–Si Alloys
- Effect of TiC Nanoparticles on Solidification Processing and Properties of Al– Mg– Si Alloy
- Microstructure and Mechanical Properties of Mn–Sr Modified Iron Containing Al–Si Alloys
- In Situ Processing of Rapidly Solidified Al- wt%Cu Droplets
- Understanding Pre-solidified Grains in Structural Castings of Nemalloy HE Experiments
- High-Speed Observations of Ultrasonic Fragmentation and De-agglomeration Process of Free-Floating Intermetallics and Oxide Particles
- Growth Morphology of Nodular Primary Silicon in Hypereutectic Al–Si Alloy and Its Growth Mechanism
- Al–Mg Si–Mg Alloys: Microstructure and Mechanical Properties from High-Pressure Die Casting to Additive Manufacturing
- Phase Transformation and Microstructure Evolution of AA Alloy Made by Laser Additive Manufacturing
- Computational and Microstructural Analysis to Understand the Correlation Between Precipitate Distribution and Mechanical Properties in Al–Cu–Mg–Mn Wire Material
- Solubility Limit of Iron in Aluminum and Its Alloys: Role on Recrystallization, Grain Growth, Texture, and Interfacial Segregation Leading to Ductile Failure
- Heat Treatment of Al–Mg–Si–Mn Alloys with Varying Mg/Si Ratio
- Influence of Heat Treatment on the Electrical Resistivity of Aluminum Alloyed with Zirconium and Scandium
- Micro and Mechanical Characteristic of Hotband Annealed of a Continuous Cast Al– Cu Alloy with Potential Application in High Strength and Low Cost Auto Forming Parts or Sheets
- Effect of Homogenization on Anodic Film and Electrochemical Behavior of an A Alloy After Sealing with Stearic Sealant
- An Advanced Industrial Methodology for Optimizing the Properties and the Process of Homogenization for Extruded AA xxx and AA xxx
- Evolution of Work Hardening and Hemming in xxx Aluminum Alloys in the Course of Natural Aging Following Continuous Annealing
- Christian Bollmann, Chengchao Yu, Mehdi Lalpoor, and Alexis Miroux Quantification of Plastic Strain in the Precipitate Free Zone of Naturally Aged Al–Mg–Si Alloys
- Precipitation Hardening in Innovative Processing of xxx Aluminum Alloys
- Weldability Study of AlMg ScZr Alloys Versus Common Alloy
- Development of a Machine Learning Model to Predict Constitutive Behaviour of Macrosegregated A Alloy
- Modeling of Springback Behavior in AA -T Sheet via an Elastoplastic Self-consistent Model Incorporating Backstress
- Through-Thickness Localized Strain Distribution and Microstructural Characterization of Functionally Graded Al/GNP Composite Fabricated by Friction Stir Processing
- Correlation Between Electrochemical and Standard Testing of Aluminum Alloys
- Multi-alloy Aluminum Tubing via Shear Assisted Processing and Extrusion
- Fabrication of Aluminum Alloy Tubing from Secondary Scrap with Shear Assisted Processing and Extrusion
- Effect of Post-extrusion Heat Treatment on Mechanical Property of Aluminum Alloy Tube Produced Using Shear Assisted Processing and Extrusion (ShAPE)
- Co-Extrusion of Dissimilar Al Alloys via Shear Assisted Processing and Extrusion
- Effect of Extrusion Parameters and Heat Treatment on Strength Performance of Low Sc Alloy
- Influence of the Mg/Si Ratio on Speed Extrusion of XXX Alloys
- Part III Aluminum Reduction Technology
- Imaging Alumina Distribution Using Low-Voltage Anode Effect Detections in Anodic Current
- Advanced Alumina Dissolution Modelling
- Empirical Prediction of Alumina Dissolution Rate in a Cryolitic Melt: Comparison with the Existing Literature
- A Water Model Study of Alumina Feeding and Dispersion
- Modeling of the Heat Exchange, the Phase Change, and Dissolution of Alumina Injected in Electrolysis Cells
- Mass Transport by Waves: Physical Model with Coalescence, Fragmentation, and Displacement on a Bath-Metal Interface
- Oxide Sensor Measurements and Simultaneous Optical Observations During Dissolution of Alumina in Cryolite Melt
- Preparation of Aluminum Master Alloys by Electrolytic Co-deposition in Hall-Héroult Cells
- Direct Production of Aluminum Manganese and Silicon Alloys in Aluminum Reduction Cells: A Laboratory Test
- Direct Production of Aluminum Titanium Alloys in Aluminum Reduction Cells: A Laboratory Test
- Trace Elements in Aluminium Smelting Carbon Dust and Their Extraction
- Developing and Implementing an Efficient Forced Cooling Network at Aluminerie Alouette
- Energy Balance of the Chinese Aluminum Electrolysis Cell
- Study on Physical and Chemical Properties of High Potassium Electrolyte System and Energy Saving Test in Aluminum Reduction Cells
- The Survivability of Aluminum Potlines After Lengthy Electrical Power Outages
- Managing Power Interruptions at KA Smelter
- Restart of Copper-Insert Pots in EGA’s High Amperage Potlines
- Strategic Training and Development of Smelter Teams to Improve Business Outcomes
- Concentration Distribution of Carbon Particles in Aluminum
- Electrolysis Cells
- Effects of Anode Quality and Lithium Potassium Fluoride Contents on the Amount of Carbon Dust During Aluminum Electrolysis Process
- with High Potassium Electrolyte System
- Statistical Model for Forecasting the Cell Replacement Rate in an Aluminum Smelter
- A Pragmatic Model for Alumina Feeding
- Stabilizing a Low-Dimensional Model of Magnetohydrodynamic Instabilities in Aluminum Electrolysis Cells
- Ibrahim Mohammad and Douglas H Kelley
- An Attempt to Estimate the Sulfuric Acid Dew Point in the Flue Gas from Aluminium Electrolysis Cells
- Part IV Aluminum Reduction Technology Joint Session with REWAS:
- Decarbonizing the Metals Industry
- Cooling of Pot Gas Enabling Carbon Footprint Reductions
- Bus Bar FSW Repair During Full Operation of Alumina Electrolysis
- Building of a Superconductor Busbar at kA for an Aluminium Plant
- Stabilizing Electrolysis Cells with Oscillating Currents: Amplitude, Frequency, and Current Efficiency
- The Contribution and Economics of Demand Side Response Towards
- Decarbonizing the Aluminium Smelting Industry
- Research on Low-Temperature Aluminium Electrolysis Charging Recovery
- System of Renewable Energy Cycle Power Generation System
- Part V Cast Shop Technology
- Microalloying to Inhibit Oxidation of Al–Mg Alloys
- Heat Treatment of Mg-Containing Aluminum Alloys and in an Oxidizing Atmosphere with % CO
- Control Pin Refractory Reaction in High Magnesium–Aluminium Melts
- Reiza Mukhlis, John Grandfield, and M Akbar Rhamdhani
- Quality Defects Metallurgical Root Cause Analysis for Aluminum Thin Foil Production
- The Origins of Wagstaff Inc : Part —Two Emerging Technologies Collide
- The Origins of Wagstaff Inc : Part —Aggressive R&D
- Short- and Long-Term Aluminum Filtration Trials with Carbon-Bonded Alumina Filters
- Aluminum Melt Cleanliness Analysis Based on Direct Comparison of Computationally Segmented PoDFA Samples and LiMCA Results
- Performance of Regular and Modified Ceramic Foam Filters (CFFs) during
- Aluminium Melt Filtration in a Pilot-Scale Setup
- Effect of Flow Management on Ultrasonic Melt Processing in a Launder upon DC Casting
- Chlorine Free Degas System for Aluminium Slab Casting and Its Effect on Sheet Products
- Analytical, Numerical and Experimental Investigations of Transient Heat
- Conduction in Launder During Casting Process
- Digital Twin for Design and Optimization of DC Casting Lines
- Aluminothermic Reduction of Sulfides via Reactive Vacuum Distillation
- Dew Point Temperature Monitoring and Alarm System for Meltable Storage
- The Great Debate – High Versus Low Water Direct Chill Casting Pits – Which Is Safer?
- Evaluation of Breathability of Molten Metal PPE Fabrics
- Robert B Wagstaff, Sarah W Walker, and Samuel R Wagstaff
- Casthouse Furnace Tending: A New Approach Thanks to Custom Robotics
- Aluminium Melting Process Optimization with SmartMelt, a Digital Tool for Real-Time Operational Guidance
- Continuous Chemical Analysis of Molten Aluminum
- Numerical and Experimental Investigation of Heat Transfer in the
- Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips
- Predicted Back-Meniscus Stability for Horizontal Single Belt Casting (HSBC)
- Using a Single Impingement Feeding System
- Energy Resilient Foundries: The “Small is Beautiful” Projects
- Quantitative Assessment of Operational Parameters on Die Temperature During an Industrial Low-Pressure Die Casting Process
- Adaptive Tempering in High-Pressure Die Casting Through Prediction Functions
- Microstructural Modification of a High-Pressure Die-Cast A Alloy Through
- Friction Stir Processing and Its Effect on Mechanical Properties
- The Local Squeeze Technology for Challenging Aluminium HPDC Automotive Components
- The Effect of the Holding Time on the Microstructure of Gd-Containing
- Effect of Heat Treatment on Mechanical Properties of Er-, Dy-, and Eu-Modified A Alloy
- Effects of Casting Temperature and Iron Content on the Microstructure of Hypoeutectic A Aluminium Alloy
- Part VI Electrode Technology for Aluminum Production
- Assessment of Pre-baked Anodes Homogeneity Using Acousto-Ultrasonic
- Testing and D Interpolation Methods
- Daniel Rodrigues, Carl Duchesne, Donald Picard, and Julien Lauzon-Gauthier
- Driving Continuous Improvement in a Modern GPC/CPC Testing
- Laboratory
- Heather Riche, Leona Fletcher, Maia Hunt, and Les Edwards
- Effect of Coke Type on Partial Replacement of Coke with Modified Biocoke in Anodes Used in Primary Aluminum Production
- Higher CPC High Sulfur in Coke Blending Ratio to Optimize Production
- Cost Without Lowering Standard Anode Quality
- Machine Vision Sensor Based on Image Texture Analysis Applied to Industrial Anode Paste
- Optical and Electrochemical Characterisation of Carbon Anodes with Varying Porosity and Coke Quality
- Blocked Flue Wall Detection and Improved Safety for Anti-Flooding Module:
- A New Approach for Safer Operation of Anode Baking Furnaces
- Dynamics of Anode Baking Furnace VOC Emissions Through a Firing Cycle
- Anode Rod Tracking: A New Marking Method for Optimized Implementation
- Plate Yokes Anode Assemblies Without Cast Iron
- Bio-Binders and Their Carbonization and Interaction with Petroleum Coke During Baking
- The Development of RUSAL’s Prebake Anode Production in Support of the Company’s Green Initiatives
- Ecofriendly Glue for the Aluminium Electrolysis Pot
- EGA Journey with Different Ramming Pastes
- Quality Evaluation of Nitride–Bonded SiC Sidelining Materials: Historical
- Trends – Including Results and Development of Test Methods
- Part VII Primary Aluminum Industry—Energy and Emission Reductions:
- Vaporization of Fluorides from Aluminium Cells, Part I: Theoretical Study on Replacement of Aluminium Fluoride and Soda
- Vaporization of Fluorides from Aluminium Cells, Part II: Treatment of Spent Potlining in a Laboratory Furnace
- Ready-to-Use Cathodes in High-Amperage Technologies
- Scale Formation in Primary Aluminium Production
- Sampling and Analysis Methodology Review to Report Total PFC Emissions
- Reflections on the Low-Voltage Anode Effect in Aluminium Electrolysis Cells
- Environmental Enhancement of Potroom Processes by Using a Machine Vision System
- Halvor Kvande: An Academic Ambassador in Aluminum Between China and Norway
- A Historical Review of Aluminum Reduction Cell Start-Up and Early Operation
- Direct and Indirect CO Equivalent Emissions from Primary Aluminium Production
- Gas Recycling and Energy Recovery Future Handling of Flue Gas from Aluminium Electrolysis Cells
- The TMS Industrial Aluminum Electrolysis Course—History, Development of Contents, and Future
- Part VIII Recycling and Sustainability in Cast Shop Technology: Joint Session with REWAS
- Process-Related Characterization of the Influence of the Die Design on the Microstructure and the Mechanical Properties of Profiles Made from Directly Recycled Hot Extruded EN AW- Aluminum Chips
- Effect of Compaction and Thermal De-coating Pre-treatments on the Recyclability of Coated and Uncoated Aluminium
- Innovative Utilization of Aluminum-Based Secondary Materials for Production of Metallurgical Silicon and Alumina-Rich Slag
- Recycling Aluminum Casting Alloy Scrap Using Molten Salt Electrolysis
- Use of Incinerator Bottom Ash (IBA) in Aluminium Recycling
- Towards Formulation of AlSi Mg Alloy from Incinerator Bottom Ash
